document number: 94423 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 24-apr-08 1 thyristor/thyristor, 105 a (add-a-pak tm generation 5 power modules) vsku/v105..pbf series vishay high power products mechanical description the generation 5 of add-a-pak tm module combines the excellent thermal perform ance obtained by the usage of direct bonded copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid copper baseplate at the bottom side of the device. the cu baseplate allows an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improved thermal spread. the generation 5 of aap modules is manufactured without hard mold, eliminating in this way any possible direct stress on the leads. the electrical terminals are secured against axial pull-out: they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other vishay hpp modules. features ? high voltage ? industrial standard package ? thick al metal die and double stick bonding ? thick copper baseplate ? ul e78996 approved ? 3500 v rms isolating voltage ? totally lead (pb)-free ? designed and qualified for industrial level benefits ? up to 1600 v ? full compatible to-240aa ? high surge capability ? easy mounting on heatsink ?al 2 0 3 dbc insulator ? heatsink grounded electrical description these modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, ups and battery charger. product summary i t(av) 105 a add-a-pak tm rohs compliant major ratings and characteristics symbol characteristics values units i t(av) 85 c 105 a i t(rms) 165 i tsm 50 hz 1785 60 hz 1870 i 2 t 50 hz 15.91 ka 2 s 60 hz 14.52 i 2 t 159.1 ka 2 s v rrm range 400 to 1600 v t stg - 40 to 125 c t j - 40 to 130
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94423 2 revision: 24-apr-08 vsku/v105..pbf series vishay high power products thyristor/thyristor, 105 a (add-a-pak tm generation 5 power modules) electrical specifications notes (1) i 2 t for time t x = i 2 t x t x (2) average power = v t(to) x i t(av) + r t x (i t(rms) ) 2 (3) 16.7 % x x i av < i < x i av (4) i > x i av voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v v drm , maximum repetitive peak off-state voltage, gate open circuit v i rrm , i drm at 130 c ma vsku/v105 04 400 500 400 20 08 800 900 800 12 1200 1300 1200 16 1600 1700 1600 on-state conduction parameter symbol test conditions values units maximum average on-state current i t(av) 180 conduction, half sine wave, t c = 85 c 105 a maximum continuous rms on-state current i t(rms) dc 165 t c 77 c maximum peak, one-cycle non-repetitive on-state current i tsm t = 10 ms no voltage reapplied sinusoidal half wave, initial t j = t j maximum 1785 a t = 8.3 ms 1870 t = 10 ms 100 % v rrm reapplied 1500 t = 8.3 ms 1570 t = 10 ms t j = 25 c no voltage reapplied 2000 t = 8.3 ms 2100 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied initial t j = t j maximum 15.91 ka 2 s t = 8.3 ms 14.52 t = 10 ms 100 % v rrm reapplied 11.25 t = 8.3 ms 10.27 t = 10 ms t j = 25 c no voltage reapplied 20.00 t = 8.3 ms 18.30 maximum i 2 t for fusing i 2 t (1) t = 0.1 to 10 ms, no voltage reapplied t j = t j maximum 159.1 ka 2 s maximum value or threshold voltage v t(to) (2) low level (3) t j = t j maximum 0.80 v high level (4) 0.85 maximum value of on-state slope resistance r t (2) low level (3) t j = t j maximum 2.37 m high level (4) 2.25 maximum peak on-state or forward voltage v tm i tm = x i t(av) t j = 25 c 1.64 v v fm i fm = x i f(av) maximum non-repetitive rate of rise of turned on current di/dt t j = 25 c, from 0.67 v drm , i tm = x i t(av) , i g = 500 ma, t r < 0.5 s, t p > 6 s 150 a/s maximum holding current i h t j = 25 c, anode supply = 6 v, resistive load, gate open circuit 200 ma maximum latching current i l t j = 25 c, anode supply = 6 v, resistive load 400
document number: 94423 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 24-apr-08 3 vsku/v105..pbf series thyristor/thyristor, 105 a (add-a-pak tm generation 5 power modules) vishay high power products note (1) available with dv/dt = 1000 v/s, to complete code add s90 i.e. vsku105/16as90 note ? table shows the increment of thermal resistance r thjc when devices operate at diffe rent conduction angles than dc triggering parameter symbol test conditions values units maximum peak gate power p gm 12 w maximum average gate power p g(av) 3 maximum peak gate current i gm 3a maximum peak negative gate voltage - v gm 10 v maximum gate voltage required to trigger v gt t j = - 40 c anode supply = 6 v resistive load 4.0 t j = 25 c 2.5 t j = 125 c 1.7 maximum gate current required to trigger i gt t j = - 40 c anode supply = 6 v resistive load 270 ma t j = 25 c 150 t j = 125 c 80 maximum gate voltage that will not trigger v gd t j = 125 c, rated v drm applied 0.25 v maximum gate current that will not trigger i gd 6ma blocking parameter symbol test conditions values units maximum peak reverse and off-state leakage current at v rrm , v drm i rrm , i drm t j = 130 c, gate open circuit 20 ma rms insulation voltage v ins 50 hz, circuit to base, all terminals shorted 2500 (1 min) 3500 (1 s) v maximum critical rate of rise of off-state voltage dv/dt (1) t j = 130 c, linear to 0.67 v drm , gate open circuit 500 v/s thermal and mechanical specifications parameter symbol test conditions values units junction operating te mperature range t j - 40 to 130 c storage temperature range t stg - 40 to 125 maximum internal thermal resistance, junction to case per module r thjc dc operation 0.135 k/w typical thermal resistance, case to heatsink r thcs mounting surface flat, smooth and greased 0.1 mounting torque 10 % to heatsink a mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. 5 nm busbar 3 approximate weight 110 g 4oz. case style jedec to-240aa r conduction per junction devices sine half wave conduction rectangular wave conduction units 180 120 90 60 30 180 120 90 60 30 vsku/v105 0.04 0.05 0.06 0.08 0.12 0.03 0.05 0.06 0.08 0.12 c/w
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94423 4 revision: 24-apr-08 vsku/v105..pbf series vishay high power products thyristor/thyristor, 105 a (add-a-pak tm generation 5 power modules) fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - on-state power loss characteristics fig. 4 - on-state power loss characteristics fig. 5 - maximum non- repetitive surge current fig. 6 - maximum non-repetitive surge current 70 80 90 100 110 120 130 020406080100120 30 60 90 120 180 average on-state current (a) maximum allowable case temperature (c) conduction angle vsk.105.. series r (dc) = 0.27 k/ w thjc 70 80 90 100 110 120 130 0 20406080100120140160180 dc 30 60 90 120 180 average on-state current (a) maximum allowable case temperature (c) conduction period vsk.105.. se rie s r (dc) = 0.27 k/ w thjc 0 20 40 60 80 100 120 140 160 0 20406080100120 rm s li m i t maximum average on-state power loss (w) average on-state current (a) 180 120 90 60 30 conduction angle vsk.105.. se rie s pe r ju n c t io n t = 130c j 0 20 40 60 80 100 120 140 160 180 200 0 20406080100120140160180 dc 180 120 90 60 30 rm s li m i t conduction period maximum average on-state power loss (w) average on-state current (a) vsk.105.. se ries pe r ju n c t io n t = 1 3 0 c j 700 800 900 1000 1100 1200 1300 1400 1500 1600 110100 number of equal amplitude half cycle current pulses (n) peak half sine wave on-state current (a) init ia l t = 130c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j at any rated load condition and with rated v applied following surge. rrm vsk.105.. se ries pe r jun c t io n 600 800 1000 1200 1400 1600 1800 0.01 0.1 1 peak half sine wave on-state current (a) pulse train duration (s) maximum non repetitive surge current versus pulse train duration. control initia l t = 130c no volta ge reapp lied ra t e d v re a p p l i e d of conduc tion may not be maintained. j rrm vsk.105.. series per junction
document number: 94423 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 24-apr-08 5 vsku/v105..pbf series thyristor/thyristor, 105 a (add-a-pak tm generation 5 power modules) vishay high power products fig. 7 - on-state power loss characteristics (single phase bridge vsku + vskv) fig. 8 - on-state power loss characteristics fig. 9 - on-state voltage drop characteristics 020406080100120140 maximum allowable ambient temperature (c) 0 . 5 k / w 0. 3 k / w r = 0 . 1 k / w - d e l t a r t h s a 0 . 2 k / w 0 . 7 k / w 1 k / w 2 k / w 0 100 200 300 400 500 600 04080120160200 total output current (a) maximum total power loss (w) 180 (sine) 180 (rect) 2 x vsk.105.. series si n g l e ph a se br i d g e connected t = 1 3 0 c j 020406080100120140 maximum allowable ambient temperature (c) 1 k / w 0 . 5 k / w 0 . 3 k / w r = 0 . 1 k / w - d e l t a r t h s a 0 . 2 k/ w 0 100 200 300 400 500 600 700 800 900 0 50 100 150 200 250 300 350 400 450 total output current (a) maximum total pow er loss (w) 60 (rec t) 3 x vsk.105.. series 6-pulse midpoint connection bridge t = 130c j i o 1 10 100 1000 0 0.5 1 1.5 2 2.5 3 3.5 t = 2 5 c j insta nt ane ous on-sta t e curre nt (a) instantaneous on-state voltage (v) t = 1 3 0 c j vsk.105.. series pe r j u n c t io n
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94423 6 revision: 24-apr-08 vsku/v105..pbf series vishay high power products thyristor/thyristor, 105 a (add-a-pak tm generation 5 power modules) fig. 10 - current ratings characteristics f ig. 11 - current ratings characteristics fig. 12 - thermal impedance z thjc characteristics fig. 13 - gate characteristics 100 200 300 400 500 600 700 10 20 30 40 50 60 70 80 90 100 100 a 50 a ra te of fa ll of on-state current - d i/ d t (a/ s) ma ximum reverse recovery charge - qrr (c) i = 200 a tm 20 a 10 a vsk.105.. se rie s t = 1 2 5 c j 20 40 60 80 100 120 140 10 20 30 40 50 60 70 80 90 100 ma ximum reverse rec overy curre nt - irr (a) rate of fall of forward current - di/dt (a/s) 100 a 50 a i = 200 a tm 20 a 10 a vsk.105.. se rie s t = 1 2 5 c j 0.01 0.1 1 0.001 0.01 0.1 1 10 sq ua re wa ve pulse dura t io n (s) thjc tr a n si e n t th e r m a l i m p e d a n c e z ( k / w ) vsk.105.. se rie s per junction steady state value: r = 0.27 k/ w (dc operation) thjc 0.1 1 10 100 0.001 0.01 0.1 1 10 100 1000 (b) (a) (4) (3) (2) (1) inst a nt a n eo us ga t e c urre nt (a) instantaneous gate voltage (v) tj = - 4 0 c tj = 2 5 c t j = 125 c a)recommended load line for b)recommended load line for vgd igd frequency limited by pg(av) (1) pgm = 200 w, tp = 300 s (2) pgm = 60 w, tp = 1 ms (3) pgm = 30 w, tp = 2 ms (4) pgm = 12 w, tp = 5 ms <= 30% rat ed di/ d t: 15 v, 40 ohms tr = 1 s, tp >= 6 s rated di/d t: 20 v, 20 ohms tr = 0.5 s, tp >= 6 s rectangular gate pulse vsk.105.. series
document number: 94423 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 24-apr-08 7 vsku/v105..pbf series thyristor/thyristor, 105 a (add-a-pak tm generation 5 power modules) vishay high power products ordering information table note ? to order the optional hardware go to www.vishay.com/doc?95172 circuit configuration 1 - module type 2 - circuit configuration (see end of datasheet) 3 - current code (1) 4 - voltage code (see voltage ratings table) 6 - p = lead (pb)-free 5 - dv/dt code: s90 = dv/dt 1000 v/s no letter = dv/dt 500 v/s (1) available with no auxiliary cathode (for details see dimensions - link at the end of datasheet) to specify change: 105 to 106 e.g.: vsku106/16p etc. device code 5 13 24 6 vsk u 105 / 16 s90 p (1) + - (2) (3) - g1 (4) k1 (5) k2 (7) g2 (6) (1) - + (2) (3) + g1 (4) k1 (5) vskv vsku k2 (7) g2 (6) links to related documents dimensions http://www.vishay.com/doc?95087
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
